HY.ETC-1 bottle sampler deep water bottle sampler HY.ETC-1 杆 hold water harvesting, artificial bottle sampler water samples were collected as a necessary tool, mainly used in environmental protection, health and epidemic prevention, water and chemical units. For acquiring smaller diameter water wells, sewage outfall, water reservoirs, etc., artificial water samples were collected in areas inconvenient to use. Water quality water harvesting similar products. Part HY.ETC-1 bottle sampler consists of three main parts: the composition of the sample rod and sampling bottles, control valves. Sampling rod is high quality aluminum alloy material, consisting of a total of four, you can tighten the connectors through fieldwork in lengths up to 4 m or more. Without the use of a period can be screwed down to one meter long pole, easy to carry. Sample bottles are manufactured with the merits of the PVC material, light weight, easy to break, good purity, does not affect water quality. Pull the main control valve is used to reach the valve opened position when water harvesting, water samples into the bottle. Sample concentration: 4 m. Use (1) when the field work, the first assembly of the sampling bottle to the sampling rod. (2) and then sampling rod is connected, a total of five sections, through joint connected. (3) After the installation you can collect water samples, but with a two sample bottles. Used interchangeably. When the bottle deep into the sampling depth, pulling cable, automatic water valve is opened, after the completion of release cable, the valve will automatically close.